Machine Tools

Universal Cams Fitted at factory for life of machine. No other cams need be designed, made or fitted.
Constant Feed-rate Feed rates are maintained irrespective of spindle speed.
Infinitely Variable Spindle Speed Allows optimum spindle speed to be set quickly and accurately.
Quick-retract Cross-Slides Allows collet removal without disturbing tooling.
Constant Deadstop Operation Deadstops need not be readjusted with changes in size.
Tool Overlapping Cross-slides are spaced at 70° allowing complete overlapping of all tools without fouling.
Rigid Construction All cutting forces are contained within the heavily ribbed, box-section Headstock Casting.
Stable Slide Geometry The Asymmetric Cross-Slide Geometry promotes stable, chatter-free forming.
Tool Interchangeability All Cross-slides are identical allowing complete interchangeability of Cross-slide tooling.
Pre-Forming All Cross-slides have generous lateral adjustment to permit forming behind the Parting Tool.
Micro-Setting Micrometer adjust and hand clamp on 10-setting variables.
Fingertip Setting No hand tools necessary for any of the following: Change of Spindle Speed. Adjustment of Collet. Timing of Cams. Timing of Accelerator cut off.
Memory Setting Diametral, Lateral and Tool Height Parameters stored in Memory-setting Block attached to tail of toolbit.
Ergonomic Setting All setting performed from front of machine.
Shoulder Level control Panel Stop, Start and Inch Controls for both Spindle and Camshaft. Digital readout of Spindle Speed, Cycle Time and Number of Parts made.
Synchronised Threading Components can be threaded by means of Synchronised Threading Attachment (STA): Fingertip Pitch and Length Setting, Threading sequence triggered by retract of drill slide.

Specifications
F26
F40
Capacity through Spindle
mm
 
round
26
40
hex
22.5
35.0
square
18.4
28.0
       
Spindle Speeds
R.P.M
850-4500
600-3000
Cycle Times
secs.
2-100
2-100
number of Cross Slides
4
4
       
Maximum Drill Stroke
mm
100
100
       
Motor Power
Kw
 
Main Drive
3.0
3.0
Accelerator
0.75
0.75
Coolant Pump
0.25
0.25
       
Dimensions (excl. Barfeed)
mm
 
Length
1400
1400
Width
600
600
Height
1600
1600
Shipping Mass
Kg
800
805